Cisco Cisco Email Security Appliance C170 Guía De Instalación
8
9
Power Up the Appliance
Power up the appliance by pressing the On/Off switch on the
front panel of the Cisco C190. You must wait 10 minutes for the
system to initialize each time you power up the system. After the
machine powers up, solid green lights on the front of the
appliance indicate that the appliance is operational. The
network activity light will be green but may not be solid. .
front panel of the Cisco C190. You must wait 10 minutes for the
system to initialize each time you power up the system. After the
machine powers up, solid green lights on the front of the
appliance indicate that the appliance is operational. The
network activity light will be green but may not be solid. .
Note
If turned on quickly after connecting power to the
appliance, the appliance powers up, the fans spin and
the LEDs turn on. Within 30-60 seconds, the fans stop
and all LEDs turn off. The appliance powers on 31
seconds later. This behavior is by design to allow the
system firmware and controller to synchronize.
appliance, the appliance powers up, the fans spin and
the LEDs turn on. Within 30-60 seconds, the fans stop
and all LEDs turn off. The appliance powers on 31
seconds later. This behavior is by design to allow the
system firmware and controller to synchronize.
Wait at least 10 minutes for the system to complete the
power up sequence and the LEDs to turn green. If you
turn the power off before the initialization is complete,
the appliance will NOT reach an operational state and
must be returned to Cisco.
10
Log In to the Appliance
You can log in to the Cisco C190 appliance using one of two
interfaces: the web-based interface or the command-line
interface.
interfaces: the web-based interface or the command-line
interface.
Web-Based Interface
Step 1
For web browser access via the Ethernet port (see the
), go to the
appliance’s management interface by entering the
following URL in a web browser:
following URL in a web browser:
http://192.168.42.42