Cisco Headend Digital Broadband Delivery System Guía De Instalación
Stop the dhctStatus, signonCount, and cmd2000 Processes
4036043 Rev B
29
Stop the dhctStatus, signonCount, and cmd2000
Processes
When sites are being upgraded, the dhctStatus utility may occasionally be in the
process of polling DHCTs. Additionally, the signonCount utility may be active in
system memory. Our engineers have discovered that upgrades proceed more
smoothly when the dhctStatus utility is not actively polling DHCTs and when the
signonCount and cmd2000 processes are not active in system memory. The
instructions in this chapter guide you through the steps required to stop these
processes.
process of polling DHCTs. Additionally, the signonCount utility may be active in
system memory. Our engineers have discovered that upgrades proceed more
smoothly when the dhctStatus utility is not actively polling DHCTs and when the
signonCount and cmd2000 processes are not active in system memory. The
instructions in this chapter guide you through the steps required to stop these
processes.
Terminating the dhctStatus Utility Polling Operation
Complete the following steps to determine whether the dhctStatus utility is actively
polling DHCTs, and then terminate the polling operation, if necessary.
1 If necessary, open an xterm window on the DNCS.
2 Type ps -ef | grep dhctStatus and then press Enter to determine if the
polling DHCTs, and then terminate the polling operation, if necessary.
1 If necessary, open an xterm window on the DNCS.
2 Type ps -ef | grep dhctStatus and then press Enter to determine if the
dhctStatus utility is running.
Example: (if it is running)
Example: (if it is running)
dncs 12514 12449 0 13:50:27 pts/3 0:00 /bin/ksh
/dvs/dncs/bin/dhctStatus
dncs 12556 12514 0 13:50:28 pts/3 0:01
/usr/local/bin/perl
/dvs/dncs/bin/DhctStatus/dhctStatus.pl
dncs 12681 12632 0 13:50:54 pts/10 0:00 grep dhct
3 Do the results from step 2 show that the dhctStatus utility is running?
If yes, type dhctStatus and press Enter to display the dhctStatus menu.
If no, skip the rest of this procedure.
4 To terminate the polling operation, follow these instructions.
a Type p and then press Enter. The system displays a polling menu.
b Type t and then press Enter. The system terminates the polling operation.
c Press Enter to return to the main menu.
d Press q and then press Enter to exit the menu.
b Type t and then press Enter. The system terminates the polling operation.
c Press Enter to return to the main menu.
d Press q and then press Enter to exit the menu.