Cisco Headend System Release 2.5 Guía De Instalación
Set Up the loadDhctService for Basic Authentication
4036043 Rev B
117
Set Up the loadDhctService for Basic
Authentication
Complete these instructions as dncs user.
The configuration file for the loadDhctService process is located at:
/dvs/dncs/etc/LoadDhctServerSOAPCfg.cfg. A sample portion of the file follows:
The configuration file for the loadDhctService process is located at:
/dvs/dncs/etc/LoadDhctServerSOAPCfg.cfg. A sample portion of the file follows:
# Port on which server listens for incoming requests
SOAP_PORT = 18284
# Enable/Disable SOAP SSL
SSL_MODE = DISABLE
# Enable or Disable basic authentication (parameters:
DISABLE/ENABLE)
BASIC_AUTH = ENABLE
# Server User Name
SERVER_USER_NAME = dncs
# Server Password
SERVER_PASSWD = dncs123
The following list contains a description of the parameters:
Server_Port (SOAP_PORT) — This is the port on which the loadDhctServer
listens. This is the proxy port in the loadPIMS.https Apache configuration file.
SSL_MODE — This should always be set to DISABLE. The SSL is enabled at the
Apache server layer.
BASIC_AUTH — Set it to ENABLE.
SERVER_USER_NAME — This configuration parameter defines the user name
used by the loadDhctService web service client to perform basic authentication.
SERVER_PASSWD — This configuration parameter defines the password to be
used by the client for basic authentication.
1 Launch the DNCS Control processes by clicking Control from the DNCS
Administrative Console Status window.