Cisco Cisco Email Security Appliance X1050 Referencia técnica
166
I R O N P O R T A S Y N C O S 7 . 1 C L I R E F E R E N C E G U I D E
packets should be routed. Alternate (non-default) gateways are configured using the
routeconfig
command.
Usage
Commit: This command requires a ‘commit’.
Cluster Management: This command can be used in all three machine modes (cluster, group,
machine).
machine).
Batch Command: This command does not support a batch format.
Example
sethostname
Description
The hostname is used to identify the system at the CLI prompt. You must enter a fully-qualified
hostname. The
hostname. The
sethostname
command sets the name of the IronPort appliance. The new
hostname does not take effect until you issue the
commit
command.
Usage
Commit: This command requires a ‘commit’.
Cluster Management: This command can be used in all three machine modes (cluster, group,
machine).
machine).
Batch Command: This command does not support a batch format.
Code Example 3-109
setgateway
mail3.example.com> setgateway
Warning: setting an incorrect default gateway may cause the current
connection to be interrupted when the changes are committed.
Enter new default gateway:
[10.1.1.1]> 192.168.20.1
mail3.example.com> commit
Please enter some comments describing your changes:
[]> changed default gateway to 192.168.20.1
Changes committed: Mon Jan 01 12:00:01 2003