Cisco Cisco FirePOWER Appliance 7030
6-59
FireSIGHT System User Guide
Chapter 6 Managing Devices
Configuring Interfaces
Supported Devices:
ASA FirePOWER
When editing an ASA FirePOWER interface, you can configure only the interface’s security zone from
the FireSIGHT Defense Center. See
the FireSIGHT Defense Center. See
for more information.
You configure ASA FirePOWER interfaces using the ASA-specific software and CLI. See the ASA
documentation for more information.
documentation for more information.
Note
You cannot change the type of ASA FirePOWER interface, nor can you disable the interface from the
FireSIGHT Defense Center.
FireSIGHT Defense Center.
To edit an ASA FirePOWER Interface:
Access:
Admin/Network Admin
Step 1
Select
Devices > Device Management
.
The Device Management page appears.
Step 2
Next to the device where you want to edit the interface, click the edit icon (
).
The Interfaces tab for that device appears.
Step 3
Next to the interface you want to edit, click the edit icon (
).
The Edit Interface pop-up window appears.
Step 4
From the
Security Zone
drop-down list, select an existing security zone or select
New
to add a new security
zone.
Step 5
Click
Save
.
The security zone is configured. Note that your changes do not take effect until you apply the device
configuration; see
configuration; see
for more information.
Disabling Interfaces
License:
Any
You can disable an interface by setting the interface type to
None
. Disabled interfaces appear grayed out
in the interface list.
Note
You cannot change the type of an ASA FirePOWER interface, nor can you disable the interface from the
FireSIGHT Defense Center.
FireSIGHT Defense Center.
To disable an interface:
Access:
Admin/Network Admin
Step 1
Select
Devices > Device Management
.
The Device Management page appears.
Step 2
Next to the device where you want to disable the interface, click the edit icon (
).
The Interfaces tab for that device appears.