Cisco Cisco FirePOWER Appliance 7010
D-22
FireSIGHT System User Guide
Appendix D Command Line Reference
Show Commands
Access
Basic
Syntax
show serial-number
Example
> show serial-number
stacking
Shows the stacking configuration and position on managed devices; on devices configured as primary,
also lists data for all secondary devices. For clustered stacks, this command also indicates that the stack
is a member of a cluster. The user must use the web interface to enable or (in most cases) disable
stacking; if stacking is not enabled, the command will return
also lists data for all secondary devices. For clustered stacks, this command also indicates that the stack
is a member of a cluster. The user must use the web interface to enable or (in most cases) disable
stacking; if stacking is not enabled, the command will return
Stacking not currently configured
.
This command is not available on virtual devices and ASA FirePOWER devices.
Access
Basic
Syntax
show stacking
Example
> show stacking
summary
Displays a summary of the most commonly used information (version, type, UUID, and so on) about the
device. For more detailed information, see the following
device. For more detailed information, see the following
show
commands:
,
,
Access
Basic
Syntax
show summary
Example
> show summary
time
Displays the current date and time in UTC and in the local time zone configured for the current user.
Access
Basic