Cisco Cisco FirePOWER Appliance 7010
11-11
FireSIGHT System User Guide
Chapter 11 Using Gateway VPNs
Managing VPN Deployments
Step 11
Click
Save
.
The hub node is added to your deployment and the Create New VPN Deployment pop-up window
appears again.
appears again.
Step 12
Next to
Leaf Nodes
, click the add icon (
).
The Add Leaf Node pop-up window appears.
Step 13
Repeat step
through step
to complete the leaf node, which has the same options as the hub node.
Step 14
Click
Save
.
The leaf node is added to your deployment and the Create New VPN Deployment pop-up window
appears again.
appears again.
Step 15
Click
Save
to finish configuring your deployment and the VPN page appears again.
Note that you must apply the deployment for it to take effect; see
Configuring Mesh VPN Deployments
License:
VPN
Supported Devices:
Series 3
When configuring a mesh VPN deployment, you define a group of VPNs to link any two points for a
given set of endpoints. For more information, see
given set of endpoints. For more information, see
.
The following list describes the options you can specify in your deployment.
Name
Give the deployment a unique name.
Type
Click
Mesh
to specify that you are configuring a mesh deployment.
Pre-shared Key
Define a unique pre-shared key for authentication.
Device
You can select a managed device, including a device stack or cluster, as an endpoint for your
deployment. For Cisco managed devices not managed by the Defense Center you are using, select
deployment. For Cisco managed devices not managed by the Defense Center you are using, select
Other
and then specify an IP address for the endpoint.
Virtual Router
If you selected a managed device as your endpoint, select a virtual router that is currently applied
to the selected device. You cannot select the same virtual router for more than one endpoint.
to the selected device. You cannot select the same virtual router for more than one endpoint.
Interface
If you selected a managed device as your endpoint, select a routed interface that is assigned to the
selected virtual router.
selected virtual router.