Cisco Cisco FirePOWER Appliance 8390
55-16
FireSIGHT System User Guide
Chapter 55 Using Health Monitoring
Configuring Health Policies
You must apply the health policy to the appropriate appliances if you want your settings to take effect.
See
See
for more information.
Configuring FireAMP Status Monitoring
License:
Any
Use the FireAMP Status Monitor module to alert you in the following situations:
•
the Defense Center cannot connect to the Cisco cloud after an initial successful connection
•
you deregister a cloud connection using the FireAMP portal
In these cases, the module status changes to Critical and provides the cloud name associated with the
failed connection. For information on configuring a cloud connection, see
failed connection. For information on configuring a cloud connection, see
.
To configure FireAMP Status Monitor module settings:
Access:
Admin/Maint
Step 1
In the Health Policy Configuration page, select
FireAMP
Status Monitor
.
The Health Policy Configuration — FireAMP Status Monitor page appears.
Step 2
Select
On
for the
Enabled
option to enable use of the module for FireAMP status monitoring.
Step 3
You have three options:
•
To save your changes to this module and return to the Health Policy page, click
Save Policy and Exit
.
•
To return to the Health Policy page without saving any of your settings for this module, click
Cancel
.
•
To temporarily save your changes to this module and switch to another module’s settings to modify,
select the other module from the list at the left of the page. If you click
select the other module from the list at the left of the page. If you click
Save Policy and Exit
when you
are done, all changes you made will be saved; if you click
Cancel
, you discard all changes.
You must apply the health policy to the Defense Center if you want your settings to take effect. See
for more information.
Configuring FireSIGHT Host Usage Monitoring
License:
FireSIGHT
Use the FireSIGHT Host License Limit health status module to set FireSIGHT Host amount warning
limits. If the number of remaining FireSIGHT Hosts on the monitored device falls below the Warning
Hosts limit, the status classification for that module changes to Warning. If the number of remaining
FireSIGHT Hosts on the monitored device falls below the Critical Hosts limit, the status classification
for that module changes to Critical. That status data feeds into the health monitor.
limits. If the number of remaining FireSIGHT Hosts on the monitored device falls below the Warning
Hosts limit, the status classification for that module changes to Warning. If the number of remaining
FireSIGHT Hosts on the monitored device falls below the Critical Hosts limit, the status classification
for that module changes to Critical. That status data feeds into the health monitor.
The maximum number of hosts you can set for either limit is 1000, and the Critical host limit number
must be lower than the Warning limit.
must be lower than the Warning limit.
To configure FireSIGHT Host License Limit health module settings:
Access:
Admin/Maint