Cisco Cisco Firepower 4120 Security Appliance
Table 64: Clustering Parameters (cont.)
Parameter
Description
Cluster-Master IP Address
The IP address of the cluster master. That is, the IP address to which
cluster members connect.
For this DefensePro instance to be the cluster master, specify the value in
For this DefensePro instance to be the cluster master, specify the value in
the Device-Management-Channel IP Address field.
For this DefensePro instance to be a cluster member, specify the Device-
Management-Channel IP Address
For this DefensePro instance to be a cluster member, specify the Device-
Management-Channel IP Address
of the master DefensePro instance.
Caution:
You can change the value only when the Cluster State is
Disabled
, after you have clicked Submit.
Cluster State
The state of the cluster or cluster membership.
Values:
Values:
•
Enabled—One of the following:
—
When this DefensePro instance is the master—Enables the
cluster.
—
When this DefensePro instance is a cluster member— Joins
the cluster.
•
Disabled—One of the following:
—
When this DefensePro instance is the master—Disables the
cluster and breaks the relationship with the cluster.
—
When this DefensePro instance is a cluster member—
Leaves the cluster.
Default: Disabled
1 – In Radware DefensePro DDoS Mitigation for Cisco Firepower, the Firepower bootstrap XML file
defines this value. The Radware DefensePro DDoS Mitigation instance reads the bootstrap XML file
every time that it initializes.
© 2016 Cisco | Radware. All rights reserved. This document is Cisco Public.
Page 113 of 281