Cisco Cisco Firepower 4120 Security Appliance
Table 6: Device Properties: Event Notification Parameters
Parameters
Description
Register This APSolute
Vision Server for Device
Events
Specifies whether the APSolute Vision server configures itself as a target of the
device events.
Values:
Values:
•
Enabled—The APSolute Vision server configures itself as a target of the
device events (for example, traps, alerts, IRP messages, and packet-reporting
data).
•
Disabled—For a new device, the APSolute Vision server adds the device
without registering itself as a target for events.
For an existing device
For an existing device
, the APSolute Vision server removes itself as a target of
the device events.
Default: Enabled
Note:
APSolute Vision runs this action each time you click Submit in the dialog
box.
Register APSolute Vision
Server IP
(This parameter is available
(This parameter is available
only when the Register
This APSolute Vision
Server for Device Events
This APSolute Vision
Server for Device Events
checkbox is selected.)
The port and IP address of the APSolute Vision server to which the
managed device sends events.
Remove All Other Targets of
Device Events
(This parameter is available
(This parameter is available
only when the Register
This APSolute Vision
Server for Device Events
This APSolute Vision
Server for Device Events
checkbox is selected.)
Specifies whether the APSolute Vision server removes from the device all
recipients of device events (for example, traps and IRP messages) except for its
own address.
Default: Disabled
Default: Disabled
Note:
APSolute Vision runs this action each time you click Submit in the dialog
box. For example, if you select the checkbox and click Submit— and later, a
trap target is added to the trap target-address table—APSolute Vision removes
the additional address the next time you click Submit in the dialog box. For
more information, see
APSolute Vision Server Registered for Device Events —
DefensePro, page 55
To edit device connection information
1.
In the device pane Sites and Clusters tree, select the device name.
2.
Click the
(Edit) button.
3.
Modify the parameters described in the procedure
To add a new DefensePro device, page 51
, and click
Submit.
© 2016 Cisco | Radware. All rights reserved. This document is Cisco Public.
Page 55 of 281