Cisco Cisco WAP321 Wireless-N Access Point with Single Point Setup Manual De Mantenimiento

Descargar
Página de 179
Single Point Setup
Wireless Neighborhood
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
172
10
Cluster—The list at the top of the table shows IP addresses for all WAP 
devices that are clustered together. (This list is the same as the members 
list on the Single Point Setup > Access Points page.)
If there is only one WAP device in the cluster, only a single IP address 
column shows, indicating that the WAP device is grouped with itself.
You can click on an IP address to view more details on a particular WAP 
device.
Neighbors—Devices that are neighbors of one or more of the clustered 
devices are listed in the left column by SSID (network name).
A device that is detected as neighbor can also be a cluster member itself. 
Neighbors who are also cluster members are always shown at the top of the list 
with a heavy bar above and include a location indicator.
The colored bars to the right of each WAP device in the Neighbors list shows the 
signal strength for each of the neighbor WAP devices, as detected by the cluster 
member whose IP address is shown at the top of the column.
The color of the bar indicates the signal strength:
Dark Blue Bar—A dark blue bar and a high signal strength number (for 
example 50) indicates good signal strength detected from the neighbor, as 
seen by the device whose IP address is listed above that column.
Lighter Blue Bar—A lighter blue bar and a lower signal strength number (for 
example 20 or lower) indicates medium or weak signal strength from the 
neighbor, as seen by the device whose IP address is listed above that 
column
White Bar—A white bar and the number 0 indicates that a neighboring 
device that was detected by one of the cluster members cannot be 
detected by the device whose IP address is listed above that column.
Light Gray Bar—A light gray bar and no signal strength number indicates 
that no signal has been detected from the neighbor, but the neighbor may 
have been detected by other members of the cluster.
Dark Gray Bar—A dark gray bar and no signal strength number indicates 
the WAP device itself that corresponds to the IP address listed above it. A 
signal strength of zero is displayed because the device’s own signal 
strength is not measured.