Cisco Cisco WAP321 Wireless-N Access Point with Single Point Setup Manual De Mantenimiento

Download/Backup Configuration File

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

46

Select which configuration file you want to back up: 

•

Startup Configuration—Configuration file type used when the WAP device 
last booted. This does not include any configuration changes applied but not 
yet saved to the WAP device.

•

Backup Configuration—Backup configuration file type saved on the WAP 
device.

•

Mirror Configuration—If the Startup Configuration is not modified for at 
least 24 hours, it is automatically saved to a Mirror Configuration file. The 
Mirror Configuration file is a snapshot of a past Startup Configuration. The 
Mirror Configuration is preserved across factory resets, so it can be used to 
recover a system configuration after a factory reset by copying the Mirror 
Configuration to the Startup Configuration.

Click Save to begin the backup. For HTTP backups, a window appears to enable 
you to browse to the desired location for saving the file.

You can download a file to the WAP device to update the configuration or to 
restore the WAP device to a previously backed-up configuration. 

To download a configuration file to the WAP device:

Select Administration > Download/Backup Configuration File in the navigation 
pane.

Select Via TFTP or Via HTTP/HTTPS as the Transfer Method.

Select Download (PC to AP) as the Save Action.

For a TFTP download only, enter the Source File Name with an .xml extension. 
Include the path (where the file exists on the server) and enter the TFTP Server 
IPv4 Address.

The filename cannot contain the following characters: spaces, <, >, |, \, : , (, ), &, ; , #, 
? , *, and two or more successive periods.

Select which configuration file on the WAP device that you want replaced with the 
downloaded file: the Startup Configuration or the Backup Configuration.