Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup Manual De Mantenimiento

Reboot

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

48

Select Administration > Copy/Save Configuration in the navigation pane. 

Select the Source File Name:

•

Startup Configuration—Configuration file type used when the WAP device 
last booted. This does not include any configuration changes applied but not 
yet saved to the WAP device.

•

Backup Configuration—Backup configuration file type saved on the WAP 
device.

•

Mirror Configuration—If the Startup Configuration is not modified for at 
least 24 hours, it is automatically saved to a Mirror Configuration file. The 
Mirror Configuration file is a snapshot of a past Startup Configuration. The 
Mirror Configuration is preserved across factory resets, so it can be used to 
recover a system configuration after a factory reset by copying the Mirror 
Configuration to the Startup Configuration.

For the Destination File Name, select the file type to be replaced with the file you 
are copying. 

Click Save to begin the copy process.

When complete, a window shows the message, Copy Operation Successful.

You can use the Reboot page reboot the WAP device.

To reboot the WAP, select Administration > Reboot in the navigation pane.

Select one of these options:

•

Reboot—Reboots the WAP using Startup Configuration.

•

Reboot to Factory Default—Reboots the WAP using the factory default 
configuration file. Any customized settings are lost.

A window appears to enable you to confirm or cancel the reboot. The current 
management session might be terminated.

Click OK to reboot.