Cisco Cisco Tunnel Terminating Gateway (TTG) Guía Para Resolver Problemas
Troubleshooting the System
Taking Corrective Action ▀
Cisco ASR 5000 Series System Administration Guide ▄
OL-22970-01
Check the entry in the Oper State column next to the line card that was just halted. Its state should be Offline. If the card
was in active mode prior to the execution of this command, the state of the redundant component associated with it
should now be Active.
was in active mode prior to the execution of this command, the state of the redundant component associated with it
should now be Active.
Restoring a Previously Halted Card
Follow the instructions below to restore a card that was previously halted. These instructions assume you are at the root
prompt for the Exec mode:
prompt for the Exec mode:
Step 1
Reboot the card to be restored by entering the following command:
You will receive the following prompt:
Step 2
Press to start the reboot of the card.
Step 3
Verify that the migration was successful by entering the following command at the prompt:
Check the entry in the Oper State column next to the line card that was just restored. Its state should be the state of that
it was in before it was halted.
it was in before it was halted.