Cisco Cisco Packet Data Gateway (PDG) Guía Para Resolver Problemas
Software Management Operations
Configuring the Boot Stack ▀
Cisco ASR 5000 Series System Administration Guide ▄
OL-22970-01
Deleting a Boot Stack Entry
This procedure details how to remove an individual boot stack entry from the boot.sys file. Make sure you are at the
Exec mode prompt and enter the following commands:
Exec mode prompt and enter the following commands:
Where number specifies the boot priority used for the boot stack entry. This command removes that specific entry from
the boot stack, causing the boot.sys file to be overwritten.
the boot stack, causing the boot.sys file to be overwritten.
Network Booting Configuration Requirements
Configuring the Boot Interface
Boot interface parameters define the SPIO‘s management LAN interface that the system will use to communicate with
the management network when using the network booting method.
the management network when using the network booting method.
This procedure details how to configure the boot interface for reliable communications with your network server. Make
sure you are at the Exec mode prompt:
sure you are at the Exec mode prompt:
Step 1
Enter the Global Configuration mode by entering the following command:
The following prompt appears:
Step 2
Enter the following command:
Keyword/Variable
Description