Cisco Cisco Web Security Appliance S680 Guía Del Usuario
Chapter 27 Command Line Interface
Using the Command Line Interface
27-2
Cisco IronPort AsyncOS 7.1 for Web User Guide
OL-23207-01
Accessing the Command Line Interface
Access to the CLI varies depending on the management connection method
chosen while setting up the appliance. The factory default username and password
are listed next. Initially, only the admin user account has access to the CLI. You
can add other users with differing levels of permission after you have accessed the
CLI for the first time using the admin account. The System Setup Wizard prompts
you to change the password for the admin account.
chosen while setting up the appliance. The factory default username and password
are listed next. Initially, only the admin user account has access to the CLI. You
can add other users with differing levels of permission after you have accessed the
CLI for the first time using the admin account. The System Setup Wizard prompts
you to change the password for the admin account.
You can also reset the admin account password at any time using the
passwd
command.
You can connect using one of the following methods:
•
Ethernet. Start an SSH session with the IP address of the Web Security
appliance. The factory default IP address is 192.168.42.42. SSH is configured
to use port 22.
appliance. The factory default IP address is 192.168.42.42. SSH is configured
to use port 22.
•
Serial connection. Start a terminal session with the communication port on
your personal computer that the serial cable is connected to.
your personal computer that the serial cable is connected to.
Log in to the appliance by entering the username and password below.
•
Username:
admin
•
Password:
ironport
For example:
Working with the Command Prompt
The top-level command prompt consists of the fully qualified hostname, followed
by the greater than (
by the greater than (
>
) symbol, followed by a space. For example:
login: admin
password: ironport
example.com>