Cisco Cisco Web Security Appliance S690 Guía Del Usuario
Chapter 25 Configuring Network Settings
Configuring Network Interfaces
25-6
Cisco IronPort AsyncOS 7.1 for Web User Guide
OL-23207-01
Step 3
Specify whether or not to have separate routing for the Management Services
using the “Restrict M1 port to appliance management services only” field.
using the “Restrict M1 port to appliance management services only” field.
If this checkbox is selected, the M1 port is used for appliance management
services only and is not used for the data (Web Proxy) traffic. You will need
to configure another port for data traffic as well as separate routes for
management and data traffic. For more information about configuring routes,
see
services only and is not used for the data (Web Proxy) traffic. You will need
to configure another port for data traffic as well as separate routes for
management and data traffic. For more information about configuring routes,
see
.
Step 4
Configure Appliance Management Services.
Choose whether or not to use HTTP or HTTPS to administer AsyncOS
through the web interface. You must specify the port to access AsyncOS with
each protocol you configure.
through the web interface. You must specify the port to access AsyncOS with
each protocol you configure.
You can also choose to redirect HTTP requests to HTTPS. When you do this,
AsyncOS automatically enables both HTTP and HTTPS.
AsyncOS automatically enables both HTTP and HTTPS.
Step 5
Choose the type of wired connections plugged into the “T” network interfaces:
–
Duplex TAP. Choose Duplex TAP when the T1 port receives both
incoming and outgoing traffic. You can use half- or full-duplex Ethernet
connections.
incoming and outgoing traffic. You can use half- or full-duplex Ethernet
connections.
–
Simplex TAP. Choose Simplex TAP when you connect the T1 port to the
internal network (traffic flows from the clients to the Internet) and you
connect the T2 port to the external network (traffic flows from the
Internet to the clients).
internal network (traffic flows from the clients to the Internet) and you
connect the T2 port to the external network (traffic flows from the
Internet to the clients).
Note
Cisco recommends using simplex when possible because it can increase
performance and security.
performance and security.
Step 6
Submit and commit your changes.
Netmask
Enter the network mask to use when managing the Web
Security appliance on this network interface.
Security appliance on this network interface.
Hostname
Enter the hostname to use when managing the Web Security
appliance on this network interface.
appliance on this network interface.
Table 25-2
Interface Settings (continued)
Interface Setting
Description