Brother CS7130 Guía De Operación
UTILITY STITCHES
39
3
Stitch Name
Pattern Presser Foot Pattern No.
Joining stitch
J
15
J
16
J
17
Hand-look
quilting
J
45
Quilting
stippling
J
49
CAUTION
• Be sure to turn off the main power before
replacing the presser foot. Otherwise, injuries
may occur if the foot controller or (start/
stop button) is accidentally pressed and the
machine starts sewing.
Appliqués
You can create an appliqué by cutting a different
piece of fabric into a shape and using it as a
decoration.
piece of fabric into a shape and using it as a
decoration.
1
Baste the cut design to the fabric.
CAUTION
• If glue is used to hold the cut design in place
on the fabric, do not apply glue to areas that
will be sewn with the machine. If glue is
attached to the needle or race, the machine
may be damaged.
2
Attach zigzag foot “J”.
3
Select stitch .
4
Sew along the edge of the fabric with the
needle dropping off the edge at the right.
needle dropping off the edge at the right.
1
Appliqué fabric
2
Needle drop point
5
Remove the basting, if necessary.
Memo
• Make reinforcing straight stitches at the beginning
and the end of stitching.
CAUTION
• Be careful that the needle does not hit a pin
during sewing, as the needle can break. You
may also be injured.
Patchwork (crazy quilt) stitching
1
Fold the edge of the top piece of fabric and
place it over the lower piece.
place it over the lower piece.
2
Sew the two pieces of fabric together so the
pattern spans both pieces.
pattern spans both pieces.
Piecing
Sewing together two pieces of fabric is called
“piecing”. The fabric pieces should be cut with a 6.5
mm (1/4 inch) seam allowance.
Sew a piecing straight stitch 6.5 mm (1/4 inch) from
either the right side or the left side of the presser foot.
“piecing”. The fabric pieces should be cut with a 6.5
mm (1/4 inch) seam allowance.
Sew a piecing straight stitch 6.5 mm (1/4 inch) from
either the right side or the left side of the presser foot.
1
Baste or pin along the seam allowance of the
fabric that you wish to piece together.
fabric that you wish to piece together.
2
Attach zigzag foot “J”.
3
Select stitch or .
4
Sew with the side of the presser foot aligned
with the edge of the fabric.
with the edge of the fabric.
• For a seam allowance on the right side
Align the right side of the presser foot with the
edge of the fabric, and sew using stitch .
edge of the fabric, and sew using stitch .
1
1
6.5 mm (1/4 inch)