Brother CS7130 Guía De Operación
UTILITY STITCHES
48
1
Select the first character of the new combination.
2
Press the “+” side of
(stitch width
adjustment key).
X
The old combination of characters is cleared
from memory, and the pattern No. shown in
the LCD is entered as the first character of a
new combination.
3
Add characters by following the procedure
described in “Combining characters” (page 47).
described in “Combining characters” (page 47).
Checking characters
You can check the characters in a combination with
following method.
following method.
1
Press the “+” or “-” side of
(stitch length
adjustment key) repeatedly.
This will display the characters that have been
entered one by one on the LCD.
You can check the pattern No. and position of
each character.
This will display the characters that have been
entered one by one on the LCD.
You can check the pattern No. and position of
each character.
1
Stitch length adjustment key
2
The position of the selected pattern No.
3
The total number of characters in the combination
4
Selected pattern No.
Deleting characters
You can delete characters from the combination.
1
Press “-” side of
(stitch width adjustment
key) to delete the last character in the
combination.
1
Stitch width adjustment key
X
The last character will be deleted.
Memo
• Repeat step
1
to delete more characters.
• You can only delete the last character in a
combination.
Sewing the character stitches
All character stitches are sewn with monogramming
foot “N”.
foot “N”.
1
Select a character stitch. (Refer to page 46.)
2
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser
foot” (page 22).
3
Start sewing.
X
The stitch is sewn in the direction indicated
by the arrow.
by the arrow.
Memo
• When sewing characters, the machine
automatically sews reinforcement stitches
for each character.
• While sewing, the LCD shows the pattern
No. currently being sewn.
4
When you have finished sewing, use scissors
to trim off any excess threads at the beginning
of the stitching and between the characters.
to trim off any excess threads at the beginning
of the stitching and between the characters.