Brother Innov-is 6700D Guía De Operación
3
f
Position the embroidery foot “W2” on the
presser foot bar from behind.
presser foot bar from behind.
a Presser foot bar
g
Hold the embroidery foot in place with
your right hand, and then use the
screwdriver to securely tighten the presser
foot holder screw.
your right hand, and then use the
screwdriver to securely tighten the presser
foot holder screw.
a Presser foot holder screw
h
Plug the connector of the embroidery foot
“W2” with LED pointer into the jack on the
left of your machine.
left of your machine.
i
Press
to unlock all keys and
buttons.
→ All keys and operation buttons are unlocked, and
the previous screen is displayed.
Checking the Needle Drop Point With
the Embroidery Foot “W2” with LED
Pointer
the Embroidery Foot “W2” with LED
Pointer
The presser foot code “W2” appears on the upper left
side of the screen while the embroidery foot “W2” with
LED pointer is attached to your machine.
side of the screen while the embroidery foot “W2” with
LED pointer is attached to your machine.
a
After the embroidery frame is attached, press
in the embroidery screen.
→ The LED pointer indicates the needle drop point.
CAUTION
• Use the screwdriver included with your
machine to firmly tighten the screw of the
presser foot holder. If the screw is loose, the
needle may strike the presser foot and possibly
cause injury.
presser foot holder. If the screw is loose, the
needle may strike the presser foot and possibly
cause injury.