Brother PC-420/420PRW Guía De Operación
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Replacing the Presser Foot 39
Adjusting the pressure of
the presser foot
the presser foot
The amount of pressure that the presser foot applies
to the fabric can be adjusted.
to the fabric can be adjusted.
1
Lower the presser foot lever.
1 Presser foot lever
2
Turn the presser foot dial at the back of the
sewing machine.
The scale on the dial indicates the range from
1 (weak) to 4 (strong). Turn the dial to the right
(smaller number) to decrease the pressure.
Turn the dial to the left (larger number) to
decrease the pressure.
sewing machine.
The scale on the dial indicates the range from
1 (weak) to 4 (strong). Turn the dial to the right
(smaller number) to decrease the pressure.
Turn the dial to the left (larger number) to
decrease the pressure.
3
When you are finished sewing, reset the dial
to 3 (standard).
to 3 (standard).
Removing the presser foot
holder
holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
quilting foot. Use the screwdriver to remove the
presser foot holder.
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
quilting foot. Use the screwdriver to remove the
presser foot holder.
■ Removing the presser foot holder
1
Remove the presser foot.
• For details, refer to “Replacing the presser
• For details, refer to “Replacing the presser
2
Use the screwdriver to loosen the presser foot
holder screw.
holder screw.
1 Screwdriver
■ Attaching the presser foot holder
1
Align the presser foot holder with the lower-
left side of the presser bar.
left side of the presser bar.
2
Hold the presser foot holder in place with
your right hand, and then tighten the screw
using the screwdriver in your left hand.
your right hand, and then tighten the screw
using the screwdriver in your left hand.
1 Screwdriver
1
3
Weak
Strong
1
1