Brother Innov-is XV8500D Guía De Operación
My Design Center
8
MY DESIGN CENTER WITH SCAN
351
c
Attach the embroidery unit to the machine,
and then turn on the machine.
and then turn on the machine.
*
Refer to “Attaching the Embroidery Unit” on
page 211.
page 211.
d
Press the “Presser Foot Lifter” button to
raise the presser foot, and then press the
“Needle Position” button to raise the
needle.
raise the presser foot, and then press the
“Needle Position” button to raise the
needle.
*
The presser foot is not raised high enough when
raised with the presser foot lever.
raised with the presser foot lever.
e
After attaching the scanning frame to the
embroidery unit, swing the frame-securing
lever toward you to secure the frame.
embroidery unit, swing the frame-securing
lever toward you to secure the frame.
*
Refer to “ATTACHING THE EMBROIDERY FRAME”
on page 261.
on page 261.
■ Scanning with an Embroidery Frame
Drawings and illustrations can also be scanned
using an embroidery frame. Hoop the embroidery
frame with fabric larger than the frame. Place the
paper to be scanned on the fabric, and then secure
it, with tape.
using an embroidery frame. Hoop the embroidery
frame with fabric larger than the frame. Place the
paper to be scanned on the fabric, and then secure
it, with tape.
a Fabric
b Tape
b Tape
Scanning to Trace Background
Image
Image
If you have a favorite picture or drawing, it can
easily be traced on the scanned background image
and you can create your own pattern.
easily be traced on the scanned background image
and you can create your own pattern.
a
Press .
→ The image display screen appears.
Note
• Unthread the machine to avoid having the
thread slipping out of the needle or getting
caught on the embroidery frame.
caught on the embroidery frame.
CAUTION
• If you want to scan the small piece of paper
that cannot be placed with the magnets, copy
the image on the paper to the larger paper and
place on the scanning frame.
the image on the paper to the larger paper and
place on the scanning frame.
Note
• Make sure that presser foot and needle are
fully raised. If scanning is started with the
presser foot and needle lowered, the
scanning frame may hit the machine,
causing damage.
presser foot and needle lowered, the
scanning frame may hit the machine,
causing damage.
Note
• Unthread the machine to avoid having the
thread pull out of the needle or becoming
caught on the scanning frame.
caught on the scanning frame.
• Be sure not to attach any presser foot other
than the embroidery foot “W+” or “W”,
otherwise the presser foot will be scanned.
otherwise the presser foot will be scanned.