Brother NX-2000 Guía De Operación
SEWING LARGE PIECES OF FABRIC
36
SEWING LARGE PIECES OF FABRIC
The wide table makes sewing large pieces of fabric easier.
a
Open up the legs at the bottom of the wide
table.
table.
Pull out the four legs until they snap into place.
b
Turn off the power and pull the flat bed
attachment to the left.
attachment to the left.
→ With the flat bed attachment removed, free-arm
sewing is possible.
c
Install the wide table.
Keeping the wide table level, slowly slide it into place
until the mounting hook clicks into position.
Rotate the rubber foot attached to the bottom of each
leg to adjust the height.
Make sure that the wide table is either at the same
level or slightly lower than the surface of the needle
plate.
until the mounting hook clicks into position.
Rotate the rubber foot attached to the bottom of each
leg to adjust the height.
Make sure that the wide table is either at the same
level or slightly lower than the surface of the needle
plate.
a
Mounting hook
d
When you are finished using the wide table,
remove it.
remove it.
While slightly lifting up the wide table, pull it off to the
left.
left.
e
Install the flat bed attachment back in its
original position.
original position.
CAUTION
• Do not move the sewing machine while the wide
table is attached, otherwise damage or injuries may
occur.
occur.
• Do not use the wide table for other purposes such
as an ironing board. This can cause damage and
injury.
injury.
a
Memo
The knee lifter can be stored attached to the bottom of
the wide table.
the wide table.
CAUTION
• Do not install or remove the wide table with force,
otherwise the mounting hook may be damaged.
a
Mounting hook
a