Brother PR1000e Guía De Operación

BASIC SETTINGS AND HELP FEATURE ———————————————————————————————————————————————————————————

218

Using the Settings Key

Touch

(settings key) to change many of the basic embroidery machine settings.

Understanding the settings screen

There are five pages in the settings screen. Touch

and

in the lower-center of the screen until the

desired page is displayed. The

key appears on all pages.

■ Page 1

1 Touch to quit specifying settings. The settings

are confirmed and the screen that was
displayed before the settings key was touched
appears again.

2 The guides (type of embroidery frame holder,

embroidery frame size, centerpoint marker and
grid) for the pattern display area can be
specified. (Refer to page 220.)

3 Changing the thread color display

The color information in the thread color
sequence display and the needle bar thread
information can be switched to the color name,
the thread brand and color number or the
sewing time. (Refer to page 222.)

4 “PES” Thread Code

You can display the thread color for “PES”
format data according to the machine setting, or
setting from the embroidery editing software.
(Refer to page 223.)

5 Thumbnail Size

Specifies whether the size of image keys that
appear when selecting a pattern from the
pattern list screen are displayed “Small” or
“Large”. (Refer to page 224.)

6 Embroidery Background Color/Thumbnail

Background Color
Depending on the color of the embroidery,
changing the background color of the pattern
display area and thumbnails may make them
more visible and easier to select. (Refer to
page 224.)

■ Page 2

7 “DST” Setting

Specifies whether or not jumpstitches are cut. In
addition, when using Tajima embroidery data
(.dst), you can specify whether or not the thread
is cut according to the specified number of
jump codes. (Refer to page 225.)

8 Short Stitch Delete

Specifies the length of short stitches that are to
be deleted. (Refer to page 226.)

9 Thread Tail

Specifies the length of upper thread that
remains threaded through the needle after the
thread is trimmed (length of thread passed
through the eye of the needle). (Refer to
page 227.)

0 Basting Distance

Specify the distance between the pattern and
the basting stitching. (Refer to page 126.)

A Appliqué Distance

Specify the distance between the appliqué
pattern and the outline. (Refer to page 127.)

B Use the application check when running an

application.

Note

● If the settings for “DST” Setting 7 or Short

Stitch Delete 8 are changed from the
previous setting, the new settings are only
applied to the next embroidery.