Brother PR1000e Guía De Operación
APPENDIX ————————————————————————————————————————————————————————————————————————————
256
8
An image of the needle location appears in
the screen with the positioning detection
area framed by a red line. Affix an
embroidery positioning sticker so that it fits
within the red line, and then touch
.
1 Red line
• The positioning detection area is under the
built-in camera.
1 Built-in camera is in this box.
2 Affix the sticker in this area.
2 Affix the sticker in this area.
9
When the machine's built-in camera has
finished detecting the location of the
embroidery positioning sticker, the following
message appears.
finished detecting the location of the
embroidery positioning sticker, the following
message appears.
Note
● If the built-in camera cannot detect the
location of the embroidery positioning
sticker, the following error message
sticker, the following error message
appears. Touch
, and then perform
the procedure again starting from step
8
.
0
Remove the jumbo frame from the
embroidery machine, turn the frame around,
and then attach it to the machine.
embroidery machine, turn the frame around,
and then attach it to the machine.
1