Brother PR1000e Guía De Operación
GETTING READY ————————————————————————————————————————————————————————————————————————
28
Setting up the machine
When setting up the machine, adjust the legs so
that the machine is steady.
that the machine is steady.
1
Make sure that all packing tape affixed to the
machine is peeled off and that all packing
material is removed.
machine is peeled off and that all packing
material is removed.
2
Set up the machine while making sure that
there is sufficient space around it.
there is sufficient space around it.
3
Adjust the legs so that the machine is steady.
Use the included wrench to loosen the lock
nut on the leg that you wish to adjust.
Use the included wrench to loosen the lock
nut on the leg that you wish to adjust.
1 Lock nut
2 Adjustable foot nut
2 Adjustable foot nut
X
The foot can be turned.
4
Use the included wrench to turn the
adjustable foot nut on the foot.
Turning the nut in direction 1 lengthens the
leg; turning the nut in direction 2 shortens
the leg.
adjustable foot nut on the foot.
Turning the nut in direction 1 lengthens the
leg; turning the nut in direction 2 shortens
the leg.
1 Adjustable foot nut
• Adjust all four legs so that they securely
contact the desk or table, and the machine
is level.
is level.
5
After adjusting the legs to the desired length,
use the included wrench to tighten the nuts.
use the included wrench to tighten the nuts.
1 Lock nut
6
Press down on each corner of the
embroidery machine to check that it is
stable.
If it is still unstable, perform steps
embroidery machine to check that it is
stable.
If it is still unstable, perform steps
3
through
5
again to adjust the legs.
Minimum of
50 mm
(2 inches)
50 mm
(2 inches)
589 mm
(23-1/4
inches)
(23-1/4
inches)
More than
350 mm
(13-3/4
inches)
350 mm
(13-3/4
inches)
More than
210 mm
(8-1/4 inches)
210 mm
(8-1/4 inches)
560 mm
(22 inches)
(22 inches)
220 mm
(8-3/4 inches)
(8-3/4 inches)