Brother PR650e/PR650eC Guía De Operación
EMBROIDERING SETTINGS ——————————————————————————————————————————————————————————————————
120
f
Soak the appliqué piece in water to dissolve
the water-soluble stabilizer.
the water-soluble stabilizer.
g
Dry the appliqué piece, and then iron it if
necessary.
necessary.
Memo
● The outline is sewn using satin stitching.
● Some glue may get onto the presser foot,
needle, and needle plate at this time.
Finish embroidering the appliqué pattern,
and then clean off the glue.
Finish embroidering the appliqué pattern,
and then clean off the glue.
Note
● Do not apply a strong force when ironing,
otherwise the stitching may be damaged.
Using a frame pattern for
the outline
the outline
Using a frame pattern, the desired shape can be
added as the outline of the appliqué.
added as the outline of the appliqué.
1
After selecting and editing pattern in the
pattern editing screen, perform the
operations described in steps
pattern editing screen, perform the
operations described in steps
1
through
2
of “Creating an appliqué piece” on
page 117.
page 117.
2
Touch
to return to the previous
screen.
3
From the pattern type screen, select the
desired frame shape and pattern, and add it
to the appliqué pattern.
desired frame shape and pattern, and add it
to the appliqué pattern.
4
Touch
and then touch
.
5
Touch
to select the appliqué piece
setting.
6
Touch .