Brother PR650e/PR650eC Guía De Operación
Starting/Ending Position Settings 125
—————————————————————————————————————————————————————————————————————————————————————
4
Embroidering linked
characters
characters
Follow the procedure described below to
embroider linked characters in a single row when
the pattern extends beyond the embroidery frame.
Example: Linking “DEF” to the characters “ABC”
embroider linked characters in a single row when
the pattern extends beyond the embroidery frame.
Example: Linking “DEF” to the characters “ABC”
1
Select the character patterns for “ABC”.
2
In the embroidering settings screen, touch
.
3
Touch .
X
The needle bar is positioned in the lower-
left corner of the pattern. The embroidery
frame moves so that the needle is
positioned correctly.
left corner of the pattern. The embroidery
frame moves so that the needle is
positioned correctly.
Note
● To cancel the starting point setting and
return the starting point to the center of the
pattern, touch
.
● Use
to select a different starting
point for embroidering.
4
Touch
to return to the embroidering
settings screen, and then touch
to
continue to the embroidering screen.
X
changes to
while the starting
point is set in the lower-left corner of the
pattern.
pattern.
5
Touch
, and then press the start/
stop button to begin embroidering.
6
After the characters are embroidered, cut
the threads to a generous length, remove the
embroidery frame, and then attach the
embroidery frame again so that the
remaining characters (“DEF”) can be
embroidered.
the threads to a generous length, remove the
embroidery frame, and then attach the
embroidery frame again so that the
remaining characters (“DEF”) can be
embroidered.
1 End of the embroidering
7
As in step
1
, select the character patterns
for “DEF”.