Brother 3034D Guía Del Usuario
7
English
Trim trap
The optional trim trap <A> holds the trimmed fabric and
thread produced when sewing.
thread produced when sewing.
<A>
<B>
To install:
Insert the trim trap <A> until it contacts the front cover.
Insert the trim trap <A> until it contacts the front cover.
NOTE:
Be sure to position the positioning guide <B> to the one
on the machine.
Be sure to position the positioning guide <B> to the one
on the machine.
To remove:
Slowly pull out the trim trap.
Slowly pull out the trim trap.
NOTE:
The optional trim trap can also be used as the foot
controller holder.
The optional trim trap can also be used as the foot
controller holder.
CAUTION
Always remove the foot contrller from the trim trap
when carrying the machine.
when carrying the machine.
Free-arm sewing (removing bed extension)
Free-arm sewing enables tubular pieces to be sewn
more easily.
more easily.
1. Remove the bed extension <A>.
<A>
NOTE:
Be careful not to lose the removed bed extension.
Be careful not to lose the removed bed extension.
2. Position the fabric, and start sewing. (See
CHAPTER 5.)