Brother SB3734T Guía De Operación
7
English
Trim trap
The optional trim trap <A> holds the trimmed fabric
and thread produced when sewing.
and thread produced when sewing.
<A>
<B>
To install:
Insert the trim trap <A> until it contacts the front
cover.
Insert the trim trap <A> until it contacts the front
cover.
NOTE:
Be sure to position the positioning guide <B> to
the one on the machine.
Be sure to position the positioning guide <B> to
the one on the machine.
To remove:
Slowly pull out the trim trap.
Slowly pull out the trim trap.
NOTE:
The optional trim trap can also be used as the foot
controller holder.
The optional trim trap can also be used as the foot
controller holder.
CAUTION
Always remove the foot controller from the trim
trap when carrying the machine.
trap when carrying the machine.
Free-arm sewing (removing bed extension)
Free-arm sewing enables tubular pieces to be
sewn more easily.
sewn more easily.
1. Remove the bed extension <A>.
<A>
NOTE:
Be careful not to lose the removed bed
extension.
Be careful not to lose the removed bed
extension.
2. Position the fabric, and start sewing. (See
CHAPTER 5.)