Brother CM350R Guía De Operación

Firmly move the spatula handle across the
surface of the fabric to remove any wrinkles
and firmly attach the fabric to the mat.

a Spatula

Peeling Off the Material (Fabric for Quilt

Piecing)

After cutting the material, use a spatula to slowly
peel off just the fabric. Try not to peel off the
support sheet.

a Fabric cut out
b Support sheet remaining on mat
c Spatula

Note

• The support sheet may be unintentionally

peeled off while you are removing the fabric
from the mat under the following conditions:
-

The adhesive between the mat and support
sheet is becoming weak after repeated uses.

The support sheet tends to be strongly
attached to a certain types of fabrics.

In this case, use the included spatula to hold
the support sheet on the mat and remove the
fabric using your hand.

• After cutting, carefully remove any fibers

remaining on the support sheet.

• When attaching fabric with an iron-on sheet

attached or paper to the mat, cleanly peel off
the support sheet from the mat, or attach the
material to a different standard mat without a
support sheet attached.

• Do not leave material attached to a mat with a

support sheet attached for a long period of
time; otherwise, the adhesive will permeate the
material.

Notice on Use of High Tack Adhesive

Fabric Support Sheet

• When the sheet’s adhesive strength decreases

or fabric becomes twisted while being cut,
replace the sheet with a new one.

• When peeling the sheet off the mat or replacing

the sheet, use the spatula to carefully remove
the old sheet.

• Store the mat in between uses with the

protective sheet affixed to the support sheet.

• If a mat with a support sheet attached is not to

be used for a certain length of time, peel the
support sheet off the mat and affix the
protective sheet on the adhesive side of the mat
before storing it.

• Do not reuse a support sheet that has been

attached to the mat.

• Store the support sheet at room temperature

and in a location not exposed to high
temperatures, high humidity or direct sunlight.

• Do not bend the support sheet to store it.