Brother CM350 Guía De Operación
88
The mat cannot be recognized.
The mat will unload.
The mat will unload.
A mat that cannot be recognized has been inserted. If a mat
designed specifically for this machine is not being used, use
the specially designed mat.
designed specifically for this machine is not being used, use
the specially designed mat.
Clean the dotted marks at the edge of the mat and their
surrounding area. If the mat is still not recognized, replace
the mat with a new one.
surrounding area. If the mat is still not recognized, replace
the mat with a new one.
There are no patterns that can be detected.
The imported SVG data contains data that cannot be
converted, such as images or text.
converted, such as images or text.
There are some patterns which cannot add seam allowance.
The seam allowance settings cannot be specified for
complex pattern shapes. Select a pattern with a simple
shape.
Expanding the seam allowance to 2 mm or more may help.
complex pattern shapes. Select a pattern with a simple
shape.
Expanding the seam allowance to 2 mm or more may help.
There are some patterns which cannot set cutting distance
from the outline.
from the outline.
The cutting distance cannot be specified for complex pattern
shapes. Select a pattern with a simple shape.
shapes. Select a pattern with a simple shape.
There is a pattern out of the effective area. The pattern
cannot be cut or drawn.
OK to continue?
cannot be cut or drawn.
OK to continue?
There is a pattern(s) outside of the cutting area.
If the pattern(s) outside of the cutting area need(s) not to be
cut out or drawn, continue the operation.
To cut out or draw the pattern(s) outside of the area, increase
the setting for “Cut Area”, or move the pattern(s) into the area
specified with “Cut Area” (page 30).
If the pattern(s) outside of the cutting area need(s) not to be
cut out or drawn, continue the operation.
To cut out or draw the pattern(s) outside of the area, increase
the setting for “Cut Area”, or move the pattern(s) into the area
specified with “Cut Area” (page 30).
This data is too complicated and cannot be converted.
When your are welding or unifying patterns:
Reduce the number of patterns arranged or change the
patterns to ones with simple designs.
Reduce the number of patterns arranged or change the
patterns to ones with simple designs.
This mat cannot be used.
The mat is one that cannot be used with the function being
performed. Replace the mat.
(For example, the scanning mat was loaded while trying to
cut.)
performed. Replace the mat.
(For example, the scanning mat was loaded while trying to
cut.)
Error Messages
Causes / Solutions