Brother RJ-3050 Guía De Referencia
![Brother](https://files.manualsbrain.com/attachments/8c662d2d9dbf4f824dfb46b9a1ababe38c435c2d/common/fit/150/50/d9563199756797e8650c01d5929471667ad930bd23805d8d5e013c9eee84/brand_logo.png)
P-touch Template 2.0 Command Reference
- 39 -
7. Control Command Details
^CO
Select printer settings (cut options)
ASCII:
^
C
O
n1
n2
n3
n4
Decimal:
94 67 79 nd1 nd2
nd3 nd4
Hexadecimal: 5E 43 4F nh1 nh2
nh3 nh4
Parameters
0≤n1≤1
0≤n2≤9
0≤n3≤9
0≤n4≤1
Description
Specifies the various cut options.
n1:
Auto cut setting
(ON: 1 (default); OFF: 0)
(ON: 1 (default); OFF: 0)
(n2*10)+n3: Auto cut label number setting (1 to 99)
(Default value: 1)
n4:
Cut at end setting
(ON: 1 (default); OFF: 0)
(ON: 1 (default); OFF: 0)
This command is a dynamic command.
This command is applied to only a printer with auto cutter.
Remarks
The auto cut label number setting can be between 1 and 99.
This command becomes invalid if any other value has been specified.
Example
To cut after every two labels:
Since the auto cut setting will be set to ON and the auto cut label number will be two labels, n1=1, n2=0
and n3=2. Therefore, the command will be as follows.
^ C O 1 0 2 0
(5Eh 43h 4Fh 31h 30h 32h 30h)