HP 603605-B21 Manual De Usuario

What's New

Support for SATA Non-hot Plug 2.5" Midline (MDL) Solid State Drives

At A Glance

The HP ProLiant BL490c G7 Virtualization Blade raises the bar for memory capacity and I/O bandwidth in a half-height blade.
Coupling up to 2 Intel® Xeon® processors with 18 DIMM slots and support for up to 24 NICs, the BL490c G7 gives enterprise data
center managers the ideal server platform for hosting virtual machines.

This document covers the HP ProLiant BL490c G7 server blade only. For more information on HP BladeSystems c-Class Enclosure
and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:

HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:

http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html

HP BladeSystem c7000 Enclosure QuickSpecs:

http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html

HP BladeSystem c-Class Interconnect and Mezzanine Components:

http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html

The HP ProLiant BL490c G7 is a 2-processor server blade optimized for virtualization with high memory capacity and high
bandwidth and flexible networking.

HP ProLiant BL490c G7 server blade includes:

Processor

Processor:

Up to two (2) Intel® Xeon® 5600 Series processors
Intel® 5520 Chipset

Memory

Memory:

Eighteen (18) DIMM slots
Up to 384GB, using PC3-10600R DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated at
2 DIMMs per Channel in 12 of the 18 slots
Up to 48GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at
2 DIMMs per Channel in 12of the18 slots

Storage Controller

Storage Controller:

HP Embedded SATA RAID Controller

NOTE:

NOTE: This is a chipset SATA RAID controller. It supports RAID 0 and 1 only and no Battery Backed Write Cache. User
needs to enable the RAID option through HP RBSU (ROM Base Setup Utility) first before the RAID can be activated.
Users also need to download the OS driver from:

http://www.hp.com/support/BL490cG7

for OS Array Monitoring.

NOTE:

NOTE: HW RAID functionality requires the use of an optional Smart Array mezzanine card. See the Storage Controller
options section below.

Internal Drive Support

Internal Drive Support:

Up to two (2) non-hot plug SATA Solid State Drives (SSD)
With an attached SB40c Storage Blade, up to six (6) hot plug SFF Serial Attached SCSI (SAS) or SATA Hard Drives
(optional)

Network Controller

Network Controller:

Integrated NC553i Dual Port FlexFabric 10GbE Adapter supporting stateless TCP/IP offload, TCP Offload Engine

QuickSpecs

HP ProLiant BL490c Generation 7 (G7) Server Blade

Overview

DA - 13711 Worldwide — Version 12 — November 14, 2011

Page 2