Samsung ProXpress C3060FR Farblaser-Multifunktionsgerät Manual De Usuario

14 

Low power, Radio LAN devices (radio frequency (RF) wireless communication 

devices), operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in 

your printer system. This section is only applicable if these devices are present. 

Refer to the system label to verify the presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the 

United States of America if an FCC ID number is on the system label.

The FCC has set a general guideline of 20 cm (8 inches) separation between the 

device and the body, for use of a wireless device near the body (this does not 

include extremities). This device should be used more than 20 cm (8 inches) 

from the body when wireless devices are on. The power output of the wireless 

device (or devices), which may be embedded in your printer, is well below the 

RF exposure limits as set by the FCC.

This transmitter must not be collocated or operation in conjunction with any 

other antenna or transmitter.

Operation of this device is subject to the following two conditions: (1) This 

device may not cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause undesired 

operation of the device.

 

Wireless devices are not user serviceable. Do not modify them in any way. 
Modification to a wireless device will void the authorization to use it. 
Contact manufacturer for service.

 

 

While installing and operating this transmitter and antenna combination 

the radio frequency exposure limit of 1 mW/cm

2

 may be exceeded at 

distances close to the antenna installed. Therefore, the user must maintain 
a minimum distance of 20 cm from the antenna at all times. This device 
cannot be collocated with another transmitter and transmitting antenna.

 

15 

RFID operation is subject to the following two conditions:(1) this device may not 

cause interference, and (2) this device must accept any interference, including 

interference that may cause undesired operation of the device. (U.S.A., France, 

Taiwan only)