Samsung ProXpress C3060FR Farblaser-Multifunktionsgerät Manual De Usuario

•

•

The machine virtually prints certain patterned image to 
calibrate the color printing position. This feature 
enhances the colored image sharper and clearer, which 
means the machine prints the colored image on the 
paper more like the one in the monitor.

 

If you have moved the machine, it is strongly 
recommended to operate this menu manually.

 

•

Default: The machine automatically calibrates the 
toner density of machine for the best possible color 
print quality. If you select Off, the machine is calibrated 
by the factory default toner density.

•

Auto Tone Adjustment (Auto Tone Adj.): Allows you 
to automatically adjust tone for the best possible print 
quality.

•

Calibrating ID Sensor (Cal. ID Sensor): Automatically 
calculates the reduced or worn out supplies like toner 
or machine parts and uses this information to adjust 
the color density. For example, if the yellow toner is 
running out, the machine calculates the amount of 
remaining yellow toner and adjusts color density so 
the printouts are fine.

If you use a machine in a humid area, or you are using the 
damp print media caused by a high humidity, the print-
outs on the output tray may be curled and may not be 
stacked properly. In this case, you can set the machine to 
use this function to let print-outs stacked firmly. But, 
using this function will make the print speed slow.

You can reduce the printing noise by turning this menu 
on. However, the printing speed and quality may be 
declined. 

Uses simplex mode when printing only one original page 
or a blank page although the duplex option is enabled.

Determines whether to use the confirmation pop-up 
when you log out.