Samsung PM43F Manual De Usuario

64

Chapter 5. Menu

Connecting to a Wireless Network

Wireless IP sharer

(router having DHCP 

server)

LAN port on the 

wall

LAN cable

Samsung recommends using IEEE 802.11n. When you play video over a network 
connection, the video may not play smoothly.

•  Select a channel for the wireless IP sharer that is not currently being used. If the 

channel set for the wireless IP sharer is currently being used by another device 
nearby, this will result in interference and communication failure.

•  Your product supports only the following wireless network security protocols. 

If you select the Pure High-throughput (Greenfield) 802.11n mode and the 
Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless 
router, Samsung products will not support a connection in compliance with new Wi-
Fi certification specifications.

•  If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to 

the network via PBC (Push Button Configuration) or PIN (Personal Identification 
Number). WPS will automatically configure the SSID and WPA key in either mode.

•  Connection Methods: You can setup the wireless network connection in three ways. 

Auto Setup (Using the Auto Network Search function), Manual Setup, 

WPS(PBC)

Automatic Network Setup (Wireless)

Most wireless networks have an optional security system that requires devices 
that access the network to transmit an encrypted security code called an Access or 

Security Key

. The 

Security Key

 is based on a Pass Phrase, typically a word or a series 

of letters and numbers of a specified length you were asked to enter when you set up 
security for your wireless network. If you use this method of setting up the network 
connection, and have a 

Security Key

 for your wireless network, you will have to enter 

the Pass Phrase during the the automatic or manual setup process.

How to set up automatically

Press the 

 button on the remote control.

Select 

Network

 - 

Open Network Settings

.

Select 

Wireless

.

 

‒

The network function searches for available wireless networks. When done, it 
displays a list of the available networks.

In the list of networks, press the  or  button to select a network, and then press 

.

 

‒

If the desired wireless router does not appear, select 

Refresh

 to search again. 

 

‒

If the router cannot be found after retrying, select the 

Stop

 button. The 

Add 

Network

 button appears and you can set the network manually.

If the 

Enter password

 screen appears, go to step 6. If you select a wireless router 

that does not have security, go to step 8.

If the router has security, enter the password. (Security key or PIN).

When done, use the  button to move the cursor to 

Done

, and then press 

. The 

network test screen appears and then the verification process starts.

When the connection has been verified, select 

OK

.