Samsung BD-J5900 Manual De Usuario

Wireless Network

Wireless Router

Broadband service

NotES

 

✎

If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the wireless 

 `

network.
Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.

 `

The player supports only the following wireless security key protocols:  

 `

-  WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),  

  WPA2-PSK (TKIP/AES)
Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is 

 `

currently being used by another device nearby, it will result in interference and communication failure.
If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router to WEP, 

 `

TKIP or TKIP-AES (WPS2Mixed), the player will not support a connection in compliance with new Wi-Fi certification 

specifications.
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, 

 `

distance, obstacles, interference by other radio devices, etc).

Settings

The Home screen will not appear if you do not 

• 

configure the setup.

The OSD (On Screen Display) may change in this 

• 

player after you upgrade the software version.

The access steps may differ depending on the 

• 

menu you selected.

After the setup process is complete, you can 

• 

then operate the panel buttons and remote 

control.

After you have connected the player to your 

TV, turn on the TV and player. When you 

turn on the player the first time, the player's 

Setup screen appears on the TV. The Setup 

procedure lets you set the On Screen Display 

(OSD) and menu languages, the aspect ratio 

(screen size), the network type, and connect 

the player to your network. 

NotES

 

✎

The Home menu will not appear if you do not 

 `

configure the setup except as noted below.

If you press the 

 `

BLUE (D) button during 

network setup, you can access the Home menu 

even if the network setup is not completed yet.
When you return to the Home menu, the full 

 `

screen mode is cancelled automatically.
If you want to display the Initial Setting screen 

 `

again to make changes, press the 

 button on 

the front panel of the player for more than 5 

seconds with no disc inserted. This resets the 

player to its default settings.

After the setup process is complete. you can 

 `

operate the HDMI-CEC function.

If you want to use the Anynet+(HDMI-CEC) 

 `

function to aid in the initial set up process, 

please follow the instructions below.

1) Connect the player to an Anynet+(HDMI-

CEC) compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in 

both the TV and the player.

3) Set the TV to the 

Setup

 Procedure.

If you leave the player in the stop mode for 

 `

more than 5 minutes without using it, a screen 

saver will appear on your TV. If the player is 

left in the screen saver mode for more than 25 

minutes, the power will automatically turn off.

SCREEN

A-B

VIEW

FULL

BONUS REPEAT REPEAT

AUDIO

HOME

SUBTITLE

HOME Button : Press to move to the Home 

menu.

RETURN Button : Return to the previous menu.

 (Enter) / DIRECTION Button :  

Move the cursor or select an item. 

Activate the currently selected item. 

Confirm a setting.

EXIT Button : Press to exit the current menu.