Samsung SL-M4080FX Manual De Usuario
Using a programs setting
168
8. Faxing
20
Loading Programs
1
Place the originals face up in the DSDF or place a single original face
down on the scanner glass and close the DSDF (see "Loading originals"
on page 64).
down on the scanner glass and close the DSDF (see "Loading originals"
on page 64).
2
Press Fax from the display screen.
3
When the cursor is blinking in the input line, enter the fax number using
the numeric keypad on the control panel, or use Address Book from the
display screen, if you have stored frequently used fax numbers.
the numeric keypad on the control panel, or use Address Book from the
display screen, if you have stored frequently used fax numbers.
4
Press Programs > Load.
5
Press a program name in the list that you want to use.
6
Press OK.
7
Press Yes when the confirmation window appears.
The machine is now set to fax according to the selected setting.
8
Press (Start) on the control panel. The machine starts scanning and
sending a fax to destinations.
sending a fax to destinations.
•
When you want to cancel a fax job, press
(Stop
)
on the control panel before
the machine starts transmission or press the Job Status button on the control
panel, and select the job you want to delete, then press Delete
panel, and select the job you want to delete, then press Delete
.
•
If an original is placed on the scanner glass, the machine shows the
window asking if you want to place another page. Load another original
and press
window asking if you want to place another page. Load another original
and press
Yes. When you finish, press No
on this window.
•
While the machine is sending a fax, you cannot send an email at the same time.