Samsung SL-X7400GX Manual De Usuario
Solving other problems
263
10. Troubleshooting
18
Printing problems
Paper does not feed
into the machine.
into the machine.
•
Remove any obstructions from inside the machine.
•
Paper has not been loaded correctly. Remove
paper from the tray and reload it correctly.
paper from the tray and reload it correctly.
•
There is too much paper in the tray. Remove excess
paper from the tray.
paper from the tray.
•
The paper is too thick. Use only paper that meets
the specifications required by the machine (see
"Print media specifications" on page 282).
the specifications required by the machine (see
"Print media specifications" on page 282).
•
If an original does not feed into the machine, the
DSDF rubber pad may require to be replaced.
Contact a service representative.
DSDF rubber pad may require to be replaced.
Contact a service representative.
The paper keeps
jamming.
jamming.
•
There is too much paper in the tray. Remove excess
paper from the tray. If you are printing on special
materials, use the multi-purpose tray.
paper from the tray. If you are printing on special
materials, use the multi-purpose tray.
•
An incorrect type of paper is being used. Use only
paper that meets the specifications required by the
machine (see "Print media specifications" on page
282).
paper that meets the specifications required by the
machine (see "Print media specifications" on page
282).
•
There may be debris inside the machine. Open the
front door and remove any debris.
front door and remove any debris.
•
If an original does not feed into the machine, the
DSDF rubber pad may need to be replaced.
Contact a service representative.
DSDF rubber pad may need to be replaced.
Contact a service representative.
Envelopes skew or fail
to feed correctly.
to feed correctly.
Ensure that the paper guides are against both sides of
the envelopes.
the envelopes.
Condition
Suggested solutions
Condition
Possible cause
Suggested solutions
The machine
does not print.
does not print.
The machine is not
receiving power.
receiving power.
Check the power cord connections.
Check the power switch and the
power source.
Check the power switch and the
power source.
The machine is not
selected as the default
machine.
selected as the default
machine.
Select your machine as your default
machine in your Windows.
machine in your Windows.
Check the machine for the following:
•
The front door is not closed. Close the front door.
•
Paper is jammed. Clear the paper jam (see "Clearing paper jams"
on page 235).
on page 235).
•
No paper is loaded. Load paper (see "Loading paper in the tray"
on page 54).
on page 54).
•
The toner cartridge or the imaging unit is not installed. Install
the toner cartridge or imaging unit.
the toner cartridge or imaging unit.
If a system error occurs, contact your service representative.
The connection cable
between the computer
and the machine is not
connected properly.
between the computer
and the machine is not
connected properly.
Disconnect the machine cable and
reconnect it.
reconnect it.
The connection cable
between the computer
and the machine is
defective.
between the computer
and the machine is
defective.
If possible, attach the cable to
another computer that is working
properly and print a job. You can also
try using a different machine cable.
another computer that is working
properly and print a job. You can also
try using a different machine cable.