Samsung SL-X7400GX Manual De Usuario

•

DNS Configuration:  You can configure the DNS server.

-

Host Name: Enter the host name. You can enter up to 63 characters. 
Default name is “SEC[MAC address]”.

-

Domain Name: Enter the domain name. You can enter up to 128 
characters.

-

Primary DNS Server: Enter the address of the DNS server you want to 
use primarily.

-

Secondary DNS Server: Enter the address of the DNS server you want 
to use as an alternative.

-

Dynamic DNS Registration: If you want to use, check the checkbox(es) 

of dynamic DNS registration. If this option is checked, the machine 
registers its host name and domain name to configured DNS servers 
dynamically. Also, if this option is checked and DHCP is selected, DHCP 
FQDN options are automatically disabled. 

•

WINS: You can configure the WINS server. WINS is used in the Windows 
operating system. Select this option.

•

Display IP Address: You can set the machine to display the IP address on 
the Notification Bar. If you select this option the IP address will show on the 
Notification Bar.

You can set the IPv6 settings.

•

Protocol: Tap to use IPv6 protocol in the system. Reboot the machine to 
apply the change.

•

IPv6 Address: Shows the IPv6 address types.

-

Link-local Address: This is an IPv6 address starting with a prefix value 
FE80. This address has local link scope and is automatically generated.

-

Stateless Address: This is an IPv6 address which is formed by router 
advertised prefix and interface identifier. On a interface like Ethernet, 
interface identifier is usually derived from the Mac address of the 
machine. The advertised prefix depends on the router configurations.

 

More than one address may be configured for the router advertisement, but 
only one will be displayed in the display screen.

 

-

Stateful Address: This is an IPv6 address which is acquired by a DHCPv6 
server.

-

Manual Address: This is an IPv6 address which an administrator can 
configure manually.

•

DHCPv6 Configuration: Select the DHCPv6 configuration you want to us.

-

Use DHCP as directed by a router: DHCPv6 is enabled when a router 
advertises to use DHCPv6.

-

Always Enable DHCP: Regardless of router advertisement, use DHCPv6 
to acquire an IPv6 address.