Samsung SL-X7400GX Manual De Usuario

/p”<port name>” or

/P”<port name>”

Specifies printer port.

 

Network Port will 
be created by use 
of Standard TCP/IP 
Port monitor. For 
local port, this port 
must exist on 
system before 
being specified by 
command.

 

Printer port name can be 
specified as IP address, 
hostname, USB local port 
name, IEEE1284 port name or 
network path.

For example:

•

 /p”xxx.xxx.xxx.xxx” in 
where, “xxx.xxx.xxx.xxx” 
means IP address for 
network printer. /
p”USB001”, /P”LPT1:”, /
p”hostname”

•

/
p"\\computer_name\shar
ed_printer" or 
"\\xxx.xxx.xxx.xxx\shared_
printer" in where,  
"\\computer_name\share
d_printer" or 
"\\xxx.xxx.xxx.xxx\shared_
printer" means the 
network path to the 
printer by entering two 
slashes, the computer 
name or local IP address of 
the PC sharing the printer, 
and then the share name 
of the printer.

/a”<dest_path>” or

/A”<dest_path>”

Specifies destination path 
for installation.

 

The destination 
path should be a 
fully qualified 
path.

 

Since machine drivers should 
be installed on the OS 
specific location, this 
command applies to only 
application software.

/n”<Printer name>” 
or

/N”<Printer name>”

Specifies printer name. 
Printer instance shall be 
created as specified 
printer name.

With this parameter, you can 
add printer instances as your 
wishes.

/nd or

/ND

Commands not to set the 
installed driver as a default 
machine driver.

It indicates installed machine 
driver will not be the default 
machine driver on your 
system if there are one or 
more printer drivers installed. 
If there is no installed 
machine driver on your 
system, then this option 
won’t be applied because 
Windows OS will set installed 
printer driver as a default 
machine driver.