Samsung SL-X7400GX Manual De Usuario
389
4. Maintenance
Replacing & redistributing supplies
3
Replacing the toner cartridge
When the toner cartridge is totally empty:
•
The status LED turns red on and the display screen shows the error message
of replacing toner.
of replacing toner.
•
The machine stops printing and incoming faxes are saved in memory.
However, when the toner cartridge is empty, but you can still print black-
and-white print jobs (The submitted job must be in black and white).
and-white print jobs (The submitted job must be in black and white).
•
Check the type of the toner cartridge for your machine (see "Ordering
supplies and accessories" on page 212).
supplies and accessories" on page 212).
At this stage, the toner cartridge needs to be replaced. Be sure to prepare new
4
Replacing the imaging unit
When the imaging unit is totally empty:
•
The status LED turns red on and the display screen shows the error message
of replacing imaging unit.
of replacing imaging unit.
•
Check the type of the imaging unit for your machine ("Ordering supplies and
accessories" on page 212).
accessories" on page 212).
At this stage, the imaging unit needs to be replaced. Be sure to prepare a new
5
Redistributing toner
When the toner cartridge is near the end of its life:
•
White streaks or light printing occurs.
•
Toner low related message appears on the display.
•
The Status LED blinks.
If this happens, you can temporarily improve print quality by redistributing the
remaining toner in the cartridge. In some cases, white streaks or light printing
will still occur even after you have redistributed the toner. How to redistribute