Samsung SCX-8240NA Guía De Instalación

Installing the supplied software_ 53

It is necessary to claim swap partition of 300 MB or larger for working with large scanned images.

If you are a Macintosh or Linux OS user, refer to the Administrator’s Guide on the User’s Guide CD for installing 
printer driver.

You can install the machine software using the typical or custom method.
The following steps below are for typical installation which is recommended for most users. All components necessary for 

machine operations will be installed.
1. Make sure that the machine is connected to the network or USB and powered on.

If the “Found New Hardware Wizard” window appears during the installation procedure, click Cancel to close 
the window.

2. Insert the software CD into your CD-ROM drive.

•

The software CD should automatically run and an installation window appear.

•

If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the 
letter which represents your drive. Click OK.

•

If you use Windows Vista, click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing “X” with the letter which represents your drive and click OK.

•

If the AutoPlay window appears in Windows Vista, click Run Setup.exe in Install or run program field, and click 
Continue in the User Account Control windows.

3. Select Install now.

The Custom Installation allows IT administrator or system administrator to install printer driver and supplied 
software to multiple clients simultaneously. (See Administrator’s Guide.)

4. Read License Agreement, and select I accept the terms of the License Agreement. Then, click Next.
5. Follow the instructions in the installation window to complete the installation process.

Sun Solaris 9, 10 (x86, SPARC)
IBM AIX 5.1, 5.2, 5.3, 5.4 (PowerPC)
HP-UX 11.0, 11i v1, 11i v2, 11i v3 (PA-RISC, Itanium)

Up to 100 MB

install_guide_english.book  Page 53  Saturday, July 21, 2012  4:53 PM