HP 603602-B21 Manual De Usuario

(TOE), Fibre Channel over Ethernet (FCoE) and iSCSI protocols

NOTE:

NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric 10Gb/24-
port Module. Learn more at:

www.hp.com/go/virtualconnect

NOTE:

NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate with 1 Gb HP BladeSystem c-Class interconnect
components. Both ports will operate at the same speed.

One (1) additional 10/100 server adapter dedicated to iLO 3 Management

Mezzanine Support

Mezzanine Support:

Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards

Dual Port FlexFabric Adapter mezzanine option
Dual-Port Fibre Channel Mezzanine options for SAN connectivity (Choice of Emulex ,QLogic or Brocade)
iSCSI Ethernet mezzanine option for optimized iSCSI connectivity
Ethernet server adapter mezzanine options for additional network ports
InfiniBand (IB) Mezzanine options for low latency and high bandwidth server interconnectivity
Storage Controller mezzanine options for additional internal and external storage connectivity
I/O Accelerator mezzanine options for high transaction rate local storage
SAS mezzanine option for external direct attach and shared SAS storage

Internal USB Support

Internal USB Support:

One (1) internal USB 2.0 connector for security key devices and USB drive keys
One (1) internal SD-HC Card slot

Trusted Platform Module

Trusted Platform Module:

One (1) internal TPM 1.2 module connector

Form Factor

Form Factor:

HP ProLiant BL490c G7 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures

Infrastructure Management

Infrastructure Management:

This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also
require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades
Firmware Maintenance website at:

http://h18004.www1.hp.com/products/blades/components/c-class-

compmatrix.html

HP Integrated Lights-Out 3 (iLO 3) management processor for simplified server setup, health monitoring and recovery,
power and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money
by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple
management console. Insight Control supports both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to
continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data
center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's
changing business requirements

Operating Systems

Operating Systems:

Supports Windows, RHEL, SLES, Solaris, VMware, and Citrix XenServer

NOTE:

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and
latest listing of software drivers available for your server, please visit our Support Matrix at:

http://www.hp.com/go/ossupport

and our driver download page

Enclosures

Enclosures:

HP offers two different c-Class server blade enclosures to meet your individual needs:

The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 16 ProLiant BL490c G7 servers plugged
vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 8 HP ProLiant BL490c G7 servers
plugged horizontally.

Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator
modules are all designed to fit into the c3000 and c7000 enclosures.
For additional enclosure information, please see:

QuickSpecs

HP ProLiant BL490c Generation 7 (G7) Server Blade

Overview

DA - 13711 Worldwide — Version 12 — November 14, 2011

Page 3