Samsung SSC-1000 Manual De Usuario

a MANUAL SELECT action

This is a function for putting out camera visuals of your discretion in
the monitor of your discretion. 
Monitor selection is MON+NO.+ENTER, and camera selection is
CAM+NO.+ENTER. At this time, install so that the matrix switcher
input channel number and the address no of either the camera or the
receiver unit are the same. 
The selected monitor number and the camera number get indicated in
the first line of the LCD. 
And, the matrix switcher's action mode gets indicated in the second line.

b SEQUENCE SWITCHING action

This is a function for automatically converting the cameras
corresponded to each monitor of the matrix switcher. 
When you press the SEQUENCE button in the manual select mode,
cameras corresponded with monitors indicated in the LCD get
consecutively converted. 
At this time, sequence run is indicated in the LCD. If you press the
HOLD button in the sequence run mode, automatic conversion actions
are stopped, and sequence hold gets indicated in the LCD. 
If you press the NEXT or BEFORE button in this state, it gets
converted to the next visuals or the previous visuals of the visuals being
put out presently. 
If you want to automatically convert again, press the SEQUENCE
button. If you want to convert the SEQUENCE RUN Mode to the
manual select mode, press CAM+NO.+ENTER.