Samsung SL-C4060FX Manual De Usuario

Network settings (configuring TCP/IP) | 

138

Network settings (configuring TCP/IP)

When you connect your machine to a network, you must first configure the TCP/IP settings for 
the machine. The settings shown below are the basic settings required for using your machine as 
a network machine. You can set TCP/IP, DNS server, TCP/IPv6, Ethernet, and IP address allocation 
methods.

Ethernet

You can set Ethernet settings.

Tap 

Settings > Network Settings > Ethernet from the home screen or Apps.

   

You can also use this feature from the SyncThru™ Web Service. Open the Web browser 
from your networked computer and type the IP address of your machine (see "Settings 
tab" on page 199).

 

•  

Ethernet Port: You can enable/disable Ethernet port.

•  

Ethernet Speed: Choose the speed rate of Ethernet.

•  

MAC Address: Shows the Mac address of the machine.

TCP/IP Protocol

You can set IPv4 settings.

Tap 

Settings > Network Settings > Ethernet > TCP/IPv4 from the home screen or Apps.

   

You can also use this feature from the SyncThru™ Web Service. Open the Web browser 
from your networked computer and type the IP address of your machine (see "Settings 
tab" on page 199).

 

IP Setting

You can choose the method for allocating IP addresses.

•  

Static: Select to enter IP address/Subnet Mask/ Gateway Address manually.

•  

BOOTP: IP address/Subnet Mask/ Gateway Address are automatically allocated by the BOOTP 
Server.

•  

DHCP: IP address/Subnet Mask/ Gateway Address are automatically allocated by the DHCP 
Server.

DNS Configuration

You can configure the DNS server.

•  

Host Name: Enter the host name. You can enter up to 63 characters. Default name is “SEC[MAC 
address]”.

•  

Domain Name: Enter the domain name. You can enter up to 128 characters.