Samsung SL-C4060FX Manual De Usuario
Admin Settings |
184
•
Job Rescheduling: Processes jobs based on the order of priority set in the Contention
Management option.
Management option.
•
Smart Duplex: Uses simplex mode when printing only one original page or a blank page
although the duplex option is enabled.
although the duplex option is enabled.
•
Vapor Mode: Prevents moisture in the paper from affecting the print quality.
-
-
Off: Disables this option.
-
On: Slows the printing speed by 50% and lowers the temperature of the fusing device when
printing.
printing.
-
Auto: Detects the temperature and humidity in the machine and adjusts the settings
accordingly.
accordingly.
The machine detects the temperature and humidity again and resets the settings in the
following situations:
following situations:
- When you leave the machine unattended for over four hours when the temperature is
below 15 °C or the humidity is over 80%.
- When you print 100 papers consecutively or leave the machine unattended for one
hour after printing.
Initial settings (administrator only)
You can change the initial settings when you first turn the machine on.
If you want to stop adjusting the initial settings, press
Exit. The settings you have set so
far will be saved. However, the
Exit button is not enabled if it’s the first time using this
option.
•
Language: Select the language to use on the display screen then tap Next.
•
Note: Read and tap Next.
•
Administrator Account: Input the Name, New Password, Confirm Password.The admin is
entered as a default in Name field.
entered as a default in Name field.
•
Date & Time: Set the Date, Time, Time Zone, date and hour format, and Day light Saving.
Example for selecting the time zone, select your country area.
•
Device Attribution: Remove the existing device name and enter the device name you want to
use. Then tap
use. Then tap
Next. Keep in mind to enter the device name to be used on the network.
- If necessary, enter the location of the machine in the
Location field.
- If necessary, enter the information in the
Administrator field for the person to contact
when any problem occurs on the machine.
•
Verify Connections: Tap the Test button to verify the Ethernet Card connection. When
Connected appears after tap the Test button, press Next.
If
Connected appears after tap the Test button, press Next.
If
Not connected appears, make sure that the machine is connected to the network then verify
the LAN connection again.