Samsung SL-C4060FX Manual De Usuario

Printing on special media |

2. Unacceptable

• Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must

use adhesives compatible with the machine’s fusing temperature for 0.1 second about 170 °C
(338 °F). The extra flaps and strips might cause wrinkling, creasing, or jams, and may even
damage the fuser.

• For the best print quality, position margins no closer than 15 mm from the edges of the

envelope.

• Avoid printing over the area where the envelope’s seams meet.

Labels

To avoid damaging the machine, use only labels designed for use in laser printers.

• When selecting labels, consider the following factors:

Adhesives: Should be stable at your machine’s fusing temperature about 170 °C (338 °F).

Arrangement: Only use labels with no exposed backing between them. Labels can peel off
sheets that have spaces between the labels, causing serious jams.

Curl: Must lie flat with no more than 13 mm of curl in any direction.

Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.

• Make sure that there is no exposed adhesive material between labels. Exposed areas can cause

labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause
damage to machine components.

• Do not run a sheet of labels through the machine more than once. The adhesive backing is

designed for only a single pass through the machine.

• Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or

otherwise damaged.

CLP-68xND Series/ CLP-68xDW Series