Samsung Freestanding Electric Ranges (NE58K9430 Series) Guía De Instalación

CHECKING THE INSTALLATION SITE

Clearances and dimensions

To install the range, refer to the following figure.

 

 This range has been designed to comply with the maximum 

allowable wood cabinet temperatures of 194 °F. Make sure the wall covering, 

countertops, and cabinets around the range can withstand the heat (up to 194 °F) 

generated by the range. If not, discoloration, delamination, or melting may occur.

36"~36-4/5"

31”

4-1/2"

23-1/5"

6-3/10"

24-7/10"

48"

28-3/5"

26-3/10"

29-4/5"

26-3/10"

Hatched Faces should 

be flat and leveled.

35-7/8"

23-3/16"

1/2" min.

25"

6"

3"

24"

3"

1" min.

6”

25”

3”

24”

3”

A : Cabinet opening min 30” (76.2 cm)
B : Acceptable electrical outlet area

 

If your cabinets are over 36-4/5” high, you must install this range on a hard, heat 

resistant support that raises the surface of the range so that it is about even with 

the countertop.

 

 You must use the rear filler kit to install the range in a 

freestanding cutout cabinet. For more information, see “Optional rear filler kit” as shown 

below.

Optional rear filler kit

Used to fill gap between the range back and wall. Adds a filler strip to the rear of the 

range. This kit can only be used when the opening in the countertop is 25” deep. 

If the countertop depth is 

greater than 25", there will 

be a gap between the filler kit 

and the back wall.

  PREP

ARING T

O INS

TALL THE RANGE